Rimless frames are the least noticeable type, and they are lightweight because the nosepiece and temples are attached directly to the lenses, eliminating the weight of the rims. They tend to not be as sturdy as frames with rims, so they are not a good choice for people who frequently remove their glasses and put them on again. They are also not very suitable for lenses that correct a high degree of farsightedness, because such lenses are thin at the edges.Metal frames sfxtheatricallimeapealcontactlens are less noticeable than plastic, and they are lightweight. They are available in solid gold, gold-filled, anodized aluminum, nickel, silver, stainless steel, and now titanium and titanium alloy. Until the late 1980s, when titanium-nickel alloy and titanium frames were introduced, metal frames were, in general, more fragile than plastic frames. The titanium frames, however, are very strong and lightweight. An alloy of titanium and nickel, called Flexon, is not only strong and lightweight, but returns to its original shape after being twisted or dented. It is not perfect for everyone, though, because some people are sensitive to its nickel. Flexon frames are also relatively expensive.

Rimless frames are the least noticeable type, and they are lightweight because the nosepiece and temples are attached directly to the lenses, eliminating the weight of the rims. They tend to not be as sturdy as frames with rims, so they are not a good choice for people who frequently remove their glasses and put them on again. They are also not very suitable for lenses that correct a high degree of farsightedness, because such lenses are thin at the edges.Metal frames sfxtheatricallimeapealcontactlens are less noticeable than plastic, and they are lightweight. They are available in solid gold, gold-filled, anodized aluminum, nickel, silver, stainless steel, and now titanium and titanium alloy. Until the late 1980s, when titanium-nickel alloy and titanium frames were introduced, metal frames were, in general, more fragile than plastic frames. The titanium frames, however, are very strong and lightweight. An alloy of titanium and nickel, called Flexon, is not only strong and lightweight, but returns to its original shape after being twisted or dented. It is not perfect for everyone, though, because some people are sensitive to its nickel. Flexon frames are also relatively expensive.

Another type of multifocal, a trifocal, has an area in-between that corrects for intermediate distances (usually about 28 in). Conventional bifocals and trifocals have visible lines between the areas of different correction; however, lenses where the correction gradually changes from one area to the other, without visible lines, have been available since the 1970s. Such lenses are sfxtheatricallimeapealcontactlens sometimes called progressives or no-line bifocals.To be suitable for lenses lenses, a material must be transparent, without bubbles, and have a high index of refraction. The greater the index of refraction, the thinner the lens can be. Lenses are made from either glass or plastic (hard resin). The advantage of plastic is that it is lightweight and more impact resistant than glass. The advantage of glass is that it is scratch resistant and provides the clearest possible vision.